PF2
90 DEGREE
PISTON FILLER
WITH GRAVITY HOPPER
 11002 Decimal Drive
P. O. Box 99594
Louisville, KY 40269 (USA)
PHONE: (502) 267-9641
FAX: (502) 267-2352
E-MAIL: sales@raque.com
FOOD SYSTEMS, LLC
"A tradition of quality and excellence"



Highly accurate volumetric dispensing of non-viscous products.
  • Customized dispensing valves available.
  • All machines are approved for use in food-production facilities and conform to relevant European Community standards.
  • Pneumatic control system for accurate fills at a reduced cost.
  • Unparalleled weight accuracy across both small and large volume ranges.
90 Degree Piston Filler with Gravity Hopper
90 Degree Piston Fillers use a pneumatic control system and are specially suited for products with a high liquid content and relatively small fills.   Although this brochure shows a Gravity Hopper, 90 Degree Piston Fillers can be fitted with a variety of hopper designs.   Talk to your sales representative about your specific needs.
Dispensing Valves
The RFS Piston Filler may be fitted with any of a series of dispensing valves.   The standard valve is a piston style, positive cutoff, non-drip valve available in sizes from ½” to 3" in diameter.   Special valves, including cone valves, rectangular valves, rosette-head valves, and spreader valves are interchangeable with the standard valves.

Optional Equipment

A full range of accessory equipment and options are available including:
  • Available hoppers:
      auger, blender, jacketed, and gravity designs.
  • Operator Interface Terminal   (Touchscreen).
  • Level Control Probes.
  • Special Dispensing Valves.
  • Special Dispensing Valve Mounts.
Sanitary Construction
Raque Food Systems’ Fillers are main stays of food-production facilities across the United States and are rapidly becoming a leader in overseas’ markets.   Manufactured completely from high-quality, food-grade materials, all Raque machines are built to the highest of standards and can be CE marked for conformance to all E.U. Directives.   Recognizing the needs of our customers, all fillers can be completely cleaned without the use of tools and then reassembled to the same volumetric setting without further adjustment.
Customizing
Raque Food Systems is at its core an Engineering Company.   We design, build, and service all machines produced with the Raque name.   This gives us the ability to adapt any machine we build to meet your exact needs.   Have limited floor space? ...Have a unique product? ...have strict accuracy requirements?   Raque Food Systems specializes in finding solutions to any problem in the food industry.
Technical Data
Speed: Up to 60 Cycles Per Minute
Fill Capacity: 0.5 oz. (14-g) to 21.4 oz. (607-g)
Accuracy: Determined by product testing
Width*: 36” (914-mm) Filler Frame
Height*: 62” (1575-mm) Top of hopper +/- 2" (50.8-mm) Adjustment
Length*: 48” (1220-mm)

Electrical Requirements*:
460 VAC // 3 Phase // 60 Hz
(415 VAC // 3 Phase // 50 Hz)

Pneumatic Requirements*:
80 PSI Air (5.5 bar)
1.72 SCFM (0.81 l/sec) 		*NOTE: The data listed is a typical characteristic of a PF1.5-4 Out Piston Filler (90 degree ) and will likely vary based on individual product characteristics or customer need.   Air requirements are based on a 1.5” air cylinder with a 1” stroke.

Raque Food Systems, LLC
11002 Decimal Drive
P.O. Box 99594
Louisville, Kentucky 40269
USA
Tel: 502-267-9641
Fax: 502-267-2352
E-MAIL: sales@raque.com

 

Raque Food Systems Sales Ltd
9 Ball Mill Top Business Park
Hallow, Worcester,
WR2 6PD
England
Tel: +44 (0)1905 642820
Fax: +44 (0)1905 641379
E-MAIL: sales@raque.co.uk